Kentrol Exterior Door Handle Covers

Not all of the Jeep parts and accessories that are made from stainless steel are made to be equal.  Kentrol begins their process with grade 304 and grade 410 stainless steel tubing and sheets that have a mirror finish.  These types of steel just will not rust at all.  Kentrol then uses their proprietary tools and heir engineered drawings to create the parts and accessories for Jeeps that they make.  These parts and accessories are stamped and then drilled, machined and welded before being polished in order to ensure that you get the best fit and most perfect finish that is possible.  When compared to their competition, Kentrol uses raw materials that are thicker and all of their parts and accessories come with all of the hardware that you will need to install them. All of the installation hardware is also made from the same high quality stainless steel too.  Kentrol consistently delivers innovation, quality and the best parts and accessories made from stainless steel for Jeeps that money can buy.

Kentrol first introduced their stainless steel Jeep parts and accessories to the world in 1980.  In the 35 years between then and now, they have continuously set the standard when it comes to high quality Jeep parts and accessories that are made from stainless steel.  Each one of the Kentrol products is made from a type of steel that is known as a virgin metal.  It is not magnetic and it is impervious to rust.   

Now you can give your Jeep doors a face lift with these exterior door handle covers.  These covers are beautiful and made from the Kentrol famous steel.  Just put them over your existing door handles for a blinged up, custom look.  This is a great way to freshen up the look of the outside of your Jeep without going to too much trouble. 

 

Features at a Glance

·         Kentrol makes their exterior door handle covers with pride right here in the USA

·         These exterior door handle covers come to you complete with a warranty that is good or a lifetime

·         These are accessories that are meant for use with the Jeep Wrangler Unlimited JK model years 2007 – 2015

·         These covers have been forged from 304 stainless steel

·         They will add a flashier look to any Jeep

·         The steel used in making these covers is not magnetic and will never rust

·         When you purchase these exterior door handle covers you will get 5 of the covers

·         You will also get all of the hardware that is necessary for you to install the covers safely and properly

·         All of the hardware is made from the same type of 304 virgin stainless steel that the covers are made from

Kentrol 54 Inch Front Bumper without Holes

Bumpers are shields made from plastic, rubber, aluminum or steel that are mounted on the front of a motor vehicle.  This one in particular is made from steel.  When collisions occur at low rates of speed, the Kentrol 54 Inch front bumper will absorb the shock from the collision in order to reduce or even prevent damage to your rig.  Some bumpers use brackets or other types of energy absorbers while others use a cushioning material made from foam.

These Jeep bumpers have been designed to reduce and even prevent there being any physical damage to the front end of your Jeep in the event of a collision at low speeds.  These bumpers are not designed to be structurally related components that contribute significantly to the crashworthiness of your Jeep or for the protection of any occupants in the Jeep.  They are not meant to be safety features that are intended to mitigate or prevent injury to occupants.  These front bumpers have been designed to offer protection to the hood, grille and the cooling system as well as the front mounted lights.

You may have noticed that the bumper on a Jeep is a bit higher than one on a regular passenger car.  This is to allow for better ground clearance or steeper approach and departure angles when they are driven over grades that are steep or when they are off road and need more clearance for large rocks, tree stumps and other obstacles.

Some states do regulate the height of the bumper.  Check with your state or local agency that is responsible for the motor vehicle regulations to see if this applies to you.

The 54 inch front bumper without holes actually does have holes that have been pre – drilled for the license plate.  In order to mount this bumper in the rear of your Jeep, you will also need to purchase the CJ mounting bracket.  This bumper has been forged from stainless steel grade 304. 

Why should you buy stainless steel products that are made by Kentrol?  Simply put – it is the very best!  Not all of the products that are made from stainless steel are equal.  The ones that are made by Kentrol are made from a virgin metal known as 304 grade, surgical stainless steel.  It will not rust and it is easy to maintain.  Wax it occasionally and it will remain pristine for years to come.  This bumper does come with all of the necessary hardware.

You can get this factory style bumper with or without the holes.  This is considered to be a bolt on direct replacement part.  It has been made in the USA and comes with a comprehensive warranty!

Kentrol Bumperettes

Upgrade the exterior of your Jeep with the Bumperettes that are made by Kentrol.  These are made from polished stainless steel and they are sold in sets of two.  The bumperettes are mounted easily into the cross member holes that were drilled by the factory.  Kentrol uses a material that is rust free and non – magnetic known as virgin steel.  This type of steel can be given a high polish until it has a mirror finish.  All of the hardware that is necessary has been included.

Kentrol first introduced stainless steel accessories for Jeeps back in 1980.  They make all of their high quality parts and accessories from stainless steel and as such, they have set the standard for the industry.  Each Kentrol product is forged from stainless steel that is 3-4 grade.  This type of steel is not magnetic and it is also impervious to rust.  It is capable of being polished to the point where it has a mirror finish.

With the bumperettes that are made by Kentrol, you will be able to give the bumper of your Jeep some bling.  These beauties are made from stainless steel and they come with everything that you will need to install them.  They are available for both the front and the rear of your Jeep.

Now you can finally get those stainless steel, high quality accessories that are complete with a finish in a high gloss black!  Yes, that’s right: the bumperettes that are made by Kentrol also come in black.  They are still made from the same virgin steel and as such you never need to worry about rust like you do with your other steel accessories.  This is the same steel that Kentrol used for all of their stainless parts and accessories, it has just been given a powder coat finish in black. 

Features at a Glance

·         Kentrol makes these Bumperettes with pride right here in the USA

·         The Bumperettes and all of Kentrol’s other products come to you complete with a warranty that is good for a lifetime

·         Each one of these Bumperettes is thoroughly inspected before they are shipped

·         Made from a virgin metal known as 304 stainless steel.  This type of stainless steel is not magnetic and is impervious to rust.

·         Made using Kentrol’s own proprietary tools

·         All of the hardware that is necessary for a safe and proper installation is included

·         The Bumperettes are sold in sets of 2

·         Meant for use with the Jeep Wrangler YJ 1987 – 1995, Jeep CJ8 Scrambler 1981 – 1986, Jeep CJ7 1976 – 1986, and the Jeep CJ5 1976 – 1986

·         The Bumperettes are available in highly polished stainless steel or in the same stainless steel with a powder coat in black