Kentrol Wrangler Windshield Hinges

Kentrol is a company that makes Jeep parts and accessories from steel.  However, so do many other manufacturers.  With that being said, why would you choose the windshield hinges that are brought to you by the minds at Kentrol as opposed to a set that has been made by another manufacturer?  The answer is actually a simple one – the stainless steel.

If you don’t get it, don’t worry, you will.  Here it is…

The stainless steel that Kentrol uses to make this windshield hinge set (and everything else that they make) is something that is known as a virgin metal.  This is a specific type of stainless steel that is impervious to rust.  It is surgical grade 304 stainless steel and it is easy to take care of.  Whenever your Kentrol windshield hinges start to look rough, just wax them and they will look perfect again.

Also, these windshield hinges come to you complete with all of the hardware that is necessary to install them safely and properly.  This hardware is also made from the same type of stainless steel. 

What is currently holding your windshield on?  He windshield hinges that are brought to you by the minds at Kentrol can do the job perfectly…and with panache!  These windshield hinges are forged from stainless steel and are available in a variety of finish options that include: black textured powder coat, powder coat in smooth black or polished to a mirror finish.  What is available will vary depending on the model of your Jeep.  With the stainless steel products from Kentrol such as these windshield hinges, you will be able to add those little touches that can mean so much to your Jeep to make it look amazing!

Features at a Glance

·         Kentrol makes their windshield hinges with pride right here in the USA

·         These hinges come to you complete with a warranty that is good for a lifetime

·         You can get these hinges for the Jeep JK Wrangler and Unlimited model years 2007 – 2015

·         Enhance the style of your Jeep with the stainless steel windshield hinges.  They are durable and the ideal finishing touch for any Jeep

·         These hinges are made from a type o stainless steel that is known as a virgin metal

·         This steel is not a type that is susceptible to rust

·         It is also not magnetic

·         This type of steel can be polished to a mirror finish

·         You can choose your Kentrol windshield hinges from a variety of finish options

·         All of the hardware that is necessary to complete a safe and proper installation is included

·         All of the installation hardware is also made from the same type of stainless steel as the hinges themselves

Kentrol Rocker Guards

If you are in search of a way to instantly customize the look of your Jeep, the stainless steel rocker guards that are made by Kentrol offer you the ideal solution.  These guards are forged from a type of steel that is not magnetic and impervious to rust.  They are easy to install and come with all of the hardware for installation. 

Features at a Glance

·         Kentrol makes their Rocker Guards with pride right here in the USA

·         These guards come to you complete with a warranty that is good for a lifetime

·         The stainless steel that these guard are made from is known as a virgin metal

·         The steel will not rust

·         It is no magnetic

·         It can be polished until it has a mirror finish

·         These guards are easy to install – just screw them on and you are good to go

·         You will find these guards being sold in sets of 2

·         They are meant for use on the Jeep CJ7 1976 – 1986

·         They do come to you complete with all of the hardware that is necessary for a safe and proper installation

·         They also come with complete, highly detailed and easy to read instructions for installation

The rocker panels on your rig can be found on the side of the body below the doors and between the wheels.  Because of the fact that they are close to the ground as well as being out of your normal line of sight, they often get neglected.  However, people – especially Jeepers – often want to protect this area of the Jeep because it can get dinged up and damaged very easily.  Kentrol can supply everything you need for this area of your Jeep regardless of whether you want to completely replace the rocker panels, dress them up or just protect them.

Because this area of the Jeep is so close to the road, the rocker panels have more of a chance of being damaged by gravel and stones.  The drainage of rocker panels can also be an issue because moisture can accumulate there after snow and rain storms.  Add to this the road salt in the winter months and the rust bug can have a field day in your rocker panels…unless they are made by or protected by the rust impervious rocker guards and rocker panels that are made by Kentrol.  This kind of damage can really make any vehicle look awful so Kentrol makes these items for you to be able to keep your Jeep looking great.

Whenever you want protection or replacement parts for your Jeep and you want them to last for a long time, look at the stainless steel parts and accessories for Jeeps that are made by Kentrol. 

 

Kentrol Exterior Door Handle Covers

Not all of the Jeep parts and accessories that are made from stainless steel are made to be equal.  Kentrol begins their process with grade 304 and grade 410 stainless steel tubing and sheets that have a mirror finish.  These types of steel just will not rust at all.  Kentrol then uses their proprietary tools and heir engineered drawings to create the parts and accessories for Jeeps that they make.  These parts and accessories are stamped and then drilled, machined and welded before being polished in order to ensure that you get the best fit and most perfect finish that is possible.  When compared to their competition, Kentrol uses raw materials that are thicker and all of their parts and accessories come with all of the hardware that you will need to install them. All of the installation hardware is also made from the same high quality stainless steel too.  Kentrol consistently delivers innovation, quality and the best parts and accessories made from stainless steel for Jeeps that money can buy.

Kentrol first introduced their stainless steel Jeep parts and accessories to the world in 1980.  In the 35 years between then and now, they have continuously set the standard when it comes to high quality Jeep parts and accessories that are made from stainless steel.  Each one of the Kentrol products is made from a type of steel that is known as a virgin metal.  It is not magnetic and it is impervious to rust.   

Now you can give your Jeep doors a face lift with these exterior door handle covers.  These covers are beautiful and made from the Kentrol famous steel.  Just put them over your existing door handles for a blinged up, custom look.  This is a great way to freshen up the look of the outside of your Jeep without going to too much trouble. 

 

Features at a Glance

·         Kentrol makes their exterior door handle covers with pride right here in the USA

·         These exterior door handle covers come to you complete with a warranty that is good or a lifetime

·         These are accessories that are meant for use with the Jeep Wrangler Unlimited JK model years 2007 – 2015

·         These covers have been forged from 304 stainless steel

·         They will add a flashier look to any Jeep

·         The steel used in making these covers is not magnetic and will never rust

·         When you purchase these exterior door handle covers you will get 5 of the covers

·         You will also get all of the hardware that is necessary for you to install the covers safely and properly

·         All of the hardware is made from the same type of 304 virgin stainless steel that the covers are made from

Kentrol 54 Inch Front Bumper without Holes

Bumpers are shields made from plastic, rubber, aluminum or steel that are mounted on the front of a motor vehicle.  This one in particular is made from steel.  When collisions occur at low rates of speed, the Kentrol 54 Inch front bumper will absorb the shock from the collision in order to reduce or even prevent damage to your rig.  Some bumpers use brackets or other types of energy absorbers while others use a cushioning material made from foam.

These Jeep bumpers have been designed to reduce and even prevent there being any physical damage to the front end of your Jeep in the event of a collision at low speeds.  These bumpers are not designed to be structurally related components that contribute significantly to the crashworthiness of your Jeep or for the protection of any occupants in the Jeep.  They are not meant to be safety features that are intended to mitigate or prevent injury to occupants.  These front bumpers have been designed to offer protection to the hood, grille and the cooling system as well as the front mounted lights.

You may have noticed that the bumper on a Jeep is a bit higher than one on a regular passenger car.  This is to allow for better ground clearance or steeper approach and departure angles when they are driven over grades that are steep or when they are off road and need more clearance for large rocks, tree stumps and other obstacles.

Some states do regulate the height of the bumper.  Check with your state or local agency that is responsible for the motor vehicle regulations to see if this applies to you.

The 54 inch front bumper without holes actually does have holes that have been pre – drilled for the license plate.  In order to mount this bumper in the rear of your Jeep, you will also need to purchase the CJ mounting bracket.  This bumper has been forged from stainless steel grade 304. 

Why should you buy stainless steel products that are made by Kentrol?  Simply put – it is the very best!  Not all of the products that are made from stainless steel are equal.  The ones that are made by Kentrol are made from a virgin metal known as 304 grade, surgical stainless steel.  It will not rust and it is easy to maintain.  Wax it occasionally and it will remain pristine for years to come.  This bumper does come with all of the necessary hardware.

You can get this factory style bumper with or without the holes.  This is considered to be a bolt on direct replacement part.  It has been made in the USA and comes with a comprehensive warranty!

Kentrol Bumperettes

Upgrade the exterior of your Jeep with the Bumperettes that are made by Kentrol.  These are made from polished stainless steel and they are sold in sets of two.  The bumperettes are mounted easily into the cross member holes that were drilled by the factory.  Kentrol uses a material that is rust free and non – magnetic known as virgin steel.  This type of steel can be given a high polish until it has a mirror finish.  All of the hardware that is necessary has been included.

Kentrol first introduced stainless steel accessories for Jeeps back in 1980.  They make all of their high quality parts and accessories from stainless steel and as such, they have set the standard for the industry.  Each Kentrol product is forged from stainless steel that is 3-4 grade.  This type of steel is not magnetic and it is also impervious to rust.  It is capable of being polished to the point where it has a mirror finish.

With the bumperettes that are made by Kentrol, you will be able to give the bumper of your Jeep some bling.  These beauties are made from stainless steel and they come with everything that you will need to install them.  They are available for both the front and the rear of your Jeep.

Now you can finally get those stainless steel, high quality accessories that are complete with a finish in a high gloss black!  Yes, that’s right: the bumperettes that are made by Kentrol also come in black.  They are still made from the same virgin steel and as such you never need to worry about rust like you do with your other steel accessories.  This is the same steel that Kentrol used for all of their stainless parts and accessories, it has just been given a powder coat finish in black. 

Features at a Glance

·         Kentrol makes these Bumperettes with pride right here in the USA

·         The Bumperettes and all of Kentrol’s other products come to you complete with a warranty that is good for a lifetime

·         Each one of these Bumperettes is thoroughly inspected before they are shipped

·         Made from a virgin metal known as 304 stainless steel.  This type of stainless steel is not magnetic and is impervious to rust.

·         Made using Kentrol’s own proprietary tools

·         All of the hardware that is necessary for a safe and proper installation is included

·         The Bumperettes are sold in sets of 2

·         Meant for use with the Jeep Wrangler YJ 1987 – 1995, Jeep CJ8 Scrambler 1981 – 1986, Jeep CJ7 1976 – 1986, and the Jeep CJ5 1976 – 1986

·         The Bumperettes are available in highly polished stainless steel or in the same stainless steel with a powder coat in black

Kentrol Tailgate Hinge Set

Now it is possible for you to get stainless steel accessories of high quality that have a black finish in high gloss and you won’t ever have to worry about them rusting like you do with other steel accessories that have been painted.  How is that, you ask?  Kentrol. 

Kentrol uses a special type of 304 stainless steel for their parts and accessories.  So what makes this type of stainless steel differ from other stainless steel?  This particular type of stainless steel is not magnetic for one thing.  Another property that this type of stainless steel has is that it is not susceptible to rust…ever.  This is why it is called a virgin metal.  Another great property of this type of stainless steel is that when you want to polish it, it can be polished to a near mirror finish.  Keeping it clean is a cinch too.  When it starts to get dirty or dull just apply some wax to it and it will bring the luster right back. 

Ok, so now that you know about the material that Kentrol uses for these hinges, let’s talk about the hinges themselves for a minute. 

These tailgate hinges that are made by Kentrol are made from the 304 stainless steel but they have given them a powder coat in a high gloss black.  All of the mounting hardware is included with the hinges and all of this hardware is also made from the 304 stainless.  These hinges for the tailgate are meant for the Jeep TJ Wrangler, Unlimited and Rubicon with a model year falling between 1997 and 2006.  Kentrol makes these hinges right here in the USA and they do come with a warranty.

Features at a Glance

·         The tailgate hinges that are made by Kentrol are made with pride right here in the USA

·         These tailgate hinges made by Kentrol come to you complete with a warranty.  Check the packaging material for all warranty information

·         Kentrol makes these tailgate hinges for the Jeep TJ Wrangler, Unlimited and Rubicon with a model year from 1997 – 2006

·         These tailgate hinges that are made by Kentrol come to you complete with all of the hardware necessary for a safe and proper installation, including detailed installation instructions

·         The hardware that is included with these tailgate hinges made by Kentrol are constructed from the same virgin metal that the hinges themselves are constructed from

·         The hinges that Kentrol makes for the tailgate are constructed from a virgin metal known as 304 stainless steel.  This steel is not magnetic and will not rust.  It can be polished to a near mirror finish and is easy to care for

·         These tailgate hinges have been given a powder coat in finish in a high gloss black

 

Kentrol Hardtop Lift Gate Hinges

Why would anyone want to choose Kentrol made parts and accessories over any other brands?  The answer is simple.  Kentrol parts are made from stainless steel.  Well, other companies make parts and accessories from stainless steel too, so what makes Kentrol made parts and accessories stand out from the rest?  That answer is simple too.  The stainless steel that Kentrol uses in their parts and accessories is not just special, it is proprietary. 

Kentrol uses a type of stainless steel that is known as a virgin metal.  What is a virgin metal?  This is a type of metal that is not magnetic.  Aside from that, this type of stainless steel is not susceptible to rust.  This is a surgical grade stainless steel.  It is 304 stainless steel.  Aside from the properties just mentioned, this sort of stainless steel is also extremely easy to maintain.  When it gets dirty or starts to look worn all you need to do is wax it and it will look brand new again.

So what else is good about buying parts and accessories made by Kentrol?  Kentrol always includes all of the installation hardware that is necessary for each and every part or accessory that they make.  This hardware is made from the same type of stainless steel that their parts and accessories are made from.

Lift Gate Hinges for Jeep Hard Tops

Now you too can have the stainless steel high quality accessories that have a black finish in high gloss.  In addition, you won’t need to worry about them rusting like you do with accessories made by other companies.  These lift gate hinges are made for Jeeps that have a hard top.  They are constructed from the 304 virgin, surgical grade steel that all of Kentrol’s products are so well known for. The only difference is that these hinges have been given a powder coat in a high gloss black.  All of the hardware that is necessary for a safe and proper installation is also included and all of this hardware is also made from the same type of stainless steel.  Because this is virgin stainless steel, you never have to worry about rust. 

Features at a Glance

·         These hinges for a hard top Jeep lift gate are made from a virgin metal called 304 stainless steel

·         These hinges will not be susceptible to rust

·         Kentrol gave these lift gate hinges a powder coat in high gloss black

·         These hinges for the hard top lift gate and meant for the Jeep Wrangler, Unlimited and Rubicon with a model year falling between 1987 and 2006

·         You will find that these hinges are sold as a set of two and they come with all of the hardware you will need for installation